伊人中文字幕无码专区,国产免费丝袜调教视频,免费国产在线精品一区二区三区大,把女的下面扒开添高潮视频

Principle of Refrigerator Operation

1.Principle of Refrigeration

Figure 1.Principle of Refrigeration

2.Refrigeration Cycle for Cryopumps

Two types of refrigeration cycle for cryopumps operation are in common use: the Gifford-McMahon cycle(G-M cycle) and the Modified-Solvay cycle(M-Solvay cycle). G-M cycle ensures more reliable operation, thus becomes much popular for cryopumps refrigeration cycle.
ULVAC CRYOGENICS employs G-M cycle refrigerator for CRYO-U cryopumps.

2-1.G-M(Gifford-McMahon) Cycle
G-M cycle was developed by Gifford in the late 1950’s. The displacer in this refrigeration cycle are usually mechanically driven, or pneumatically driven. G-M cycle is very efficient and reliable refrigeration cycle which operates at slow speed and gives a little damage to the seal used inside refrigerator. In this manual, the mechanical driven refrigeration cycle used in CRYO-U? cryopumps will be explained.

A The displacer is first positioned at the bottom of the cylinder, the low pressure valve closes and high pressure valve opens. ↓ (a) The compressed helium is introduced into the cylinder. ↓ B Pressure inside the cylinder increases. ↓ (b) The displacer is moved up. The cooled gas fills the space beneath the piston. ↓ C The low temperature part attains maximum volume. The high pressure valve closes and exhaust low-pressure valve opens. ↓ (c) The compressed helium passed through the regenerator into the lower part of the cylinder. While passing through the regenerator the helium is cooled because it expands. ↓ D The low temperature part attains the lowest pressure ↓ (d) The displacer is moved down and the expanded helium pumped by the compressor through the open low pressure valve. ↓ A Finally the low pressure valve is closed and the cycle repeated.

As shown in Fig. 2, the ideal P-V diagram of G-M cycle shows a square pattern.
Ideal refrigerating capacity (Q ideal) is given by the following equation where the period of one cycle is taken at t second, Q ideal?。健。?ｔ

The actual refrigerator has two stage construction to achieve extreme low temperature below 15K. Also, for cryopumps, usually the regenerator is placed inside the displacer for simplification. Two stage refrigerator is designed to reduce a load to 1st and 2nd seals with differential pressure so that it performs long-period, highly reliable operation.